KYOWA WGI-400A Instruction Manual page 6

●If the potential secondary damage generates in the System due to deterioration of the WGI-400A, always
adopt another proper technical measures for safety.
Or, trouble may occur caused by erroneous output or malfunction of the instrument.
●Installation and wiring work should be conducted more than 3 seconds after the power is cutoff.
Or, electric shock hazard or damage of the product may result.
●Do not forget to put a cover on the terminal board.
Or, electric shock hazard may result.
●Special care should be taken not to use the WGI-400A in environment with inflammable gas or vapor.
Or, fire hazard may result.
●If the WGI-400A is faulty, emitting smoke or offensive odor, or producing abnormal sound, immediately
turn OFF the power.
Or, electric shock or fire hazard may result.
Contact KYOWA's representatives for repair.
●Do not put water or foreign matters into the WGI-400A. In case if any foreign matters are entered,
immediately turn OFF the power.
Or, electric shock or fire hazard may result.
Contact KYOWA's representatives for repair.
●If the power cable is damaged, turn OFF the power and replace the cable with a new one.
Or, electric shock or fire hazard may result.
●Always operate the WGI-400A with power voltage specified in this Instruction Manual.
Or, electric shock or fire hazard may result.
●Do not operate the WGI-400A in environment with excessive moisture, dust or oil dust.
Or, electric shock or fire hazard may result.
●Do not disassemble the WGI-400A.
Or, deterioration or malfunction of the instrument may result.
●When it started thundering, do not touch the WGI-400A or cables.
Or, electric shock hazard may result.
●Always connect the protective ground wire to the protective ground terminal.
Or, electric shock hazard or malfunction of the instrument may result.
●In order to assuredly and immediately cut off the power when failure occurred in the system or in
WGI-400A, mount an external breaker, etc.
WARNING
2