Table 3-8-3 Various Functions in Function Selecting Mode
Function Name
F-14
Operation Pattern
Initial value: '0'
F-20
TEDS Read Operation
Initial Value: '0.0.0.1'
F-21
TEDS Read Items
Initial Value: '0.0.0.'
F-22
Digital Zero during TEDS
Operation
Initial Value: '0.'
F-25
Level Test Signal
Initial value: '0'
'1000'
Key Operation and WGI-400A
Movement in Function Setting Mode
• Set value 0: Pattern 0
1: Pattern 1
2: Pattern 2
3: Pattern 3
After selecting the desired pattern, press
the SET key.
Displays the items 1), 2), 3) and 4).
1) External control input (setting not
available)
0: Allowed
2) RS command
0:Allowed
3) Key operation
0: Allowed
4) Power ON
0: Allowed
Select and change items 1), 2), 3), and 4)
and press the SET key.
Displays the items 1), 2) and 3).
1) Excitation voltage
0: Allowed
2) Rated output
0: Allowed
3) Rated capacity
0: Allowed
Select and change items 1), 2), and 3) and
press the SET key.
0: Execute
1: Prohibited
Select and press the SET key.
•
Display additional function
Set value 0: Disabled
1: Enabled
After selecting either of the above,
press the SET key.
•
Setting the test value
After setting the test value, press the
SET key.
●
Setting range: ±9999
1: Prohibited
1: Prohibited
1: Prohibited
1: Prohibited
1: Prohibited
1: Prohibited
1: Prohibited
24
Functional Description
•
Select
high/low
comparator values from 4
sets of patterns.
•
Factory default is '0.'
When no Pattern Select
•
Command
from
control input is connected,
this function is enabled.
•
Allows or prohibits the
TEDS reading operation.
•
In the factory default state,
the TEDS reading operation
is prohibited with the power
ON.
•
Allows or prohibits the
TEDS reading items.
•
In the factory default state,
all the TEDS read items are
set to '0: Allow.'
•
Execute or prohibit digital
Zeroing
during
operation.
•
In the factory default state,
it is set to '0: Execute.'
•
This function operates when
the level test command from
the control input is ON.
•
Disabled:
Displays the level test
value irrespective of the
indicated value.
•
Enabled:
The level test value is
added to the indicated
value and displayed.
(5/5)
limit
external
Zero