Dimm Installation; Dimm Removal - Supermicro A+ Server AS -1115SV-WTNRT User Manual

DIMM Installation

1. Insert the desired number of DIMMs into
the memory slots, starting from DIMMA1
Refer to the DIMM Module Population
section.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the memory
slot.
Chapter 3: Maintenance and Component Installation
.
Receptive Point
Release Tabs
38
Key
Notches
Press both ends straight
down into the memory slot.