Www.microlife.com - Microlife IR1DE1-1 Instruction Manual

Display:
Accoustic:
Memory:
Backlight:
Operating cond.:
Storage cond.:
Automatic
Switch-off:
Battery:
Battery lifetime:
Dimensions:
Weight:
IP Class:
Standards:
Expected
service life:
This device complies with the requirements of the Medical Device
Directive 93/42/EEC Class IIa. Technical alterations reserved.

15. www.microlife.com

Detailed user information about our thermometers and blood pressure
monitors as well as services can be found at www.microlife.com.
Liquid Cristal Display, with indicating unit 0.1 °C/°F
a. The unit is turned ON and ready for the
measurement: 1 short «bi» sound.
b. Complete the measurement: 1 long beep (1sec.),
if the reading is less than 37.5 °C / 99.5 °F,
10 short «beep» sounds, if the reading is equal
to or greater than 37.5 °C / 99.5 °F.
c. System error or malfunction: 3 short «bi» sounds.
a. Auto-Display the last measured temperature
when switched on.
b. 12 readings recall in the memory mode.
• The display will be lighted GREEN for 4 sec.,
when the unit is turned ON.
• The display light will be GREEN for 5 seconds,
when a measurement is completed with a
reading less than 37.5 °C / 99.5 °F.
• The display light will be RED for 5 seconds,
when a measurement is completed with a
reading equal to or higher than 37.5 °C / 99.5 °F.
10 - 40 °C / 50.0 - 104 °F;
15 - 95 % relative maximum humidity
-25 - + 55 °C / -13 - +131 °F;
15 - 95 % relative maximum humidity
Approx. 1 minute after last measurement.
Auto-off if START button is pressed.
1x CR2032 battery
approx. 1000 measurements (using a new battery)
153 mm (L) x 31 mm (W) x 20 mm (H)
53 g (w/ battery), 50 g (w/o battery)
IP21
EN 12470-5; ASTM E1965; IEC 60601-1;
IEC 60601-1-2 (EMC); IEC 60601-1-11
5 years or 12000 measurements
12