Loewe bild 5 User Handbook Manual page 93

Hide thumbs Also See for bild 5:
Table of Contents

Advertisement

Loewe bild 5 oled / bild 4 oled
User handbook
System settings
Control
DR +
You can adapt the Digital Recorder to your requirements.
Call settings for the digital recorder
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark more ...,
call other settings.
Mark DR+,
go to next column.
...
DR+
Recording
Recording
Notify hid-
den sections
Jump dis-
tance
Smart Jump
Recording
subtitles
DR+
Streaming
Mark desired setting,
go to next column.
Make settings,
OK confirm setting.
Explanation of the DR+ setting options
Recording You can set a pre-record and post-record time for
timer recordings made without auto time control.
This minimizes the risk that a part of the broadcast
is not recorded due to the broadcast starting earlier
and/or finishing later.
Factory setting: pre-record time: 1 min,
Notify
If an entry has been hidden in an archive recording,
hidden
you can get informed by a screen message when
sections
skipping a hidden area.
Factory setting: yes.
Smart jump If the „Smart jump" mode is activated you can
approach a desired place by pressing the
buttons alternately and halving the jump width. After
every 3rd jump in the same direction the jump width
is doubled (up to a maximum of 8 minutes).
If off is set you always jump the same currently set
jump width (time) with the
Factory setting: on
(1
for devices in DK, FIN, N or S: yes.
You may set the pre-record and post-record times here.
post-record time: 5 min.
and
buttons.
Serial
The serial recording tolerance is necessary to
recording
avoid recording a serial more than once when it is
tolerance
broadcast more than once a day.
It is only recorded when it begins within the
given time interval (start time +- series recording
tolerance).
Use the numeric button on the remote control to
enter the time (always two-digit for 01 to 60 min.).
Factory setting:
Recording
Select here whether subtitles are to be recorded for
subtitles
DVB stations.
Factory setting: no
DR+
With this, all the settings are activated to make all
Streaming
the films on your DR+ archive available to other
LOEWE TVs using your home network (or vice-versa,
e.g. allowing you to use the DR+ archive of other
LOEWE TVs).
See next page for further information.
and
±
30 min.
(1
.
93

Advertisement

Table of Contents
loading

Table of Contents