Loewe bild 5 User Handbook Manual page 109

Loewe bild 5 oled / bild 4 oled
User handbook
System settings
Connections
Connect
Connect subwoofer
subwoofer
Please specify here whether you want to
... Sound com-
additionally connect a subwoofer for very
ponents
good bass reproduction.
no
Back with
Select yes or no for Subwoofer.
If no subwoofer is connected, the front speakers
additionally transmit the sound parts intended for
the subwoofer as far as possible.
Proceed to Distance to left hand front speaker.
Distance to
Distance to left front speaker
left front Please enter the distance of the left front
... Sound com-
speaker from your listening position here.
ponents
speaker
0.1 m
Back with
Set the distance between the left front speaker
and your listening position in 10 cm steps.
Measure the distances from your listening position
to the front, surround, and centre speakers
respectively. The digital audio decoder calculates
delay times from this for the loudspeaker signals,
so that these reach the listener simultaneously.
Proceed to the respective other speakers (right
front speaker, left surround speaker, right
surround speaker, centre speaker and subwoofer)
and also
The selected speaker will be coloured blue.
After setting the distance to the subwoofer.
Proceed to Adjust speaker level.
100Hz 90Hz 100Hz
100Hz 100Hz
yes
Proceed with
4,0m 3,0m 4,0m
3,9m
2,0m 2,0m
4.0 m 10.0 m
Proceed with
Adjust
Adjust speaker level
speaker level
... You hear a sound from every speaker one after
Sound com-
another. But you can also select the speakers
ponents
manually with the menu control buttons
up/down. Set the volume for the respectively
active speaker shown in blue so that you get
approximately the same volume impression
from all the speakers.
-12 dB
Back with
Adjust the volume for the speaker.
Proceed to next speaker or
select speakers manually.
For balanced audio reproduction all speakers should
be set to the same volume level. A noise signal will
be reproduced automatically on each speaker in
succession. Adjust every speaker to equal perceived
volume from your listening position. The selected
speaker will be coloured blue.
After adjustment of the last speaker.
Proceed to Subwoofer phase.
Subwoofer Subwoofer phase
Here you can reverse the phase of your subwoofer. Test both values in
... Sound com-
phase
music reproduction and then select the one with which you get a better
ponents
bass reproduction.
0°
Back with
Switch a station or a DVD player playing music to music
playback.
Test both values (0º and 180º) and select the one
with which you get a clearer bass reproduction
from your listening position.
Back: Finish wizard.
This ends the sound components wizard for connecting
and setting up a speakers system.
0dB 0dB 0dB
0dB
0dB 0dB
0 dB +12 dB
Proceed with
180°
Finish wizard with
109