Loewe bild 5 oled / bild 4 oled
User handbook
Initial installation
Connect
antennas
cable(s)
Select antenna cable.
OK Connect/disconnect antenna cable.
Select the antenna cables that are connected to
your TV.
Ahead of each selected antenna, the symbol
appears.
Cable analog:
Terrestrial (DVB-T):
Cable (DVB-C):
Satellite (DVB-S/cable 1):
Satellite (DVB-S/cable 2): digital stations via
Proceed to next step.
The rest of the initial installation wizard routine
depends on the selected antennas (Cable analogue,
DVB-T, DVB-C, DVB-S) in step Connect antennas
cable(s).
The different antennas/types of reception are
described in the following sections of initial installation.
20
Setting options for reception via Cable analog:
If you have not selected Cable analog in step Connect antenna
cable(s) in the initial installation, proceed to the next section Setting
options for DVB-T reception.
analogue stations via
cable
digital stations via
antenna
digital stations via
cable
digital stations via
satellite
satellite
TV/col.
standard
The selection of a Colour standard is only required
when the Location of TV set Other country was
selected. Otherwise, the country-specific default
settings will be preset when selecting the Location
of TV set. This step will be skipped then
Select appropriate colour standard.
OK Confirm selection.
Proceed to next step.