Loewe bild 5 User Handbook Manual page 108

Loewe bild 5 oled / bild 4 oled
User handbook
System settings
Connections
Adjusting the speaker system (DAL)
Sound playback via ... – Speaker system (DIGITAL AUDIO LINK)
Enter here that you want to hear the TV sound via a speaker system
connected to Digital Audio Link. If you connect active speakers, please
use the setting Speaker system (DIGITAL AUDIO LINK).
For information on navigation within the wizard see chapter General
information on menu operation.
When setting up the speaker system for the first time, the
configuration starts with the step Connect front speakers.
Speaker system (DIGITAL AUDIO LINK) was selected in the Sound
components wizard.
Configuration/
modification Please specify whether you want to change the illustrated setting of your
... Sound com-
speaker system or whether all existing settings are to be reset to the values
ponents
of the delivery state.
Note: The newly selected parameter must be confirmed with the
button.
100Hz
100Hz
Configuration/modification
Back with
If you want to set up or change a speaker system:
Select Configuration/modification.
If nothing has been set yet, the factory settings
or otherwise the last set values are displayed.
OK Confirm selection.
Configuration/
Please specify here whether you wish to fully set up a speaker system for
...
modification Sound com-
the first time or wish to completely modify an existing one or whether you
ponents
wish to restrict yourself to changing the speaker connections, changing
the distances of the speakers from the listening position or altering the
individual volume levels.
Note: The newly selected parameter must be confirmed with the
button.
Complete
Connections only
Distances only
Levels only
Select Complete.
OK Confirm selection.
Proceed to connect and set the front speakers.
Connect
Please specify here whether you wish to use
... Sound com-
front
the TV speakers or external front speakers as
ponents
front speakers. In the latter case, their lower
speakers
limit frequency must be entered in Hz (see
instruction manual and technical data of the
speakers).
TV speakers
20 Hz
Back with
Select External speakers or TV speakers.
For External speaker go to the frequency bar
below and
set the lower limit frequency of the external
front speakers in steps of 10 Hz.
108
Speaker system
OK
Components Distances Level
90Hz 100Hz 0dB 0dB 0dB
4,0m 3,0m 4,0m
0dB
3,9m
100Hz 0dB
2,0m 2,0m
Reset to factory settings
Configuration/modification of speaker system
OK
Back with End with
Connect front speakers
100Hz 100Hz 100Hz
100Hz 100Hz
External speakers
100 Hz
Proceed with
Connect
surround
speakers
0dB
In case, external speakers were chosen as surround
speakers:
Connect
centre
speaker
200 Hz
Select the start value of the frequency response of
the speakers for the correct setting (e.g., 50Hz for
t h e s p e c i f i c a t i o n " Fre q u e n c y re s p o n s e
50-20,000Hz"). See the technical data of the speak-
ers for the value.
You can replace the external front speakers by the
TV speakers if necessary. In this case, TV speakers.
Then, the TV speakers transmit the sound of the
front speakers.
Proceed to connect and set the surround speakers.
Connect surround speakers
Please specify here whether you want to
... Sound com-
ponents connect external surround speakers. In this
case, their lower limit frequency must be
entered in Hz (see instruction manual and
technical data of the speakers).
no yes
20 Hz 100 Hz
Back with Proceed with
Select yes or no for the external surround speakers.
Select frequency bar
set the lower limit frequency of the surround
speakers in 10 Hz steps.
Select the start value of the frequency response of
the speakers for the correct setting.
Proceed to connect and set the centre speaker.
Connect centre speaker
Please specify here whether you wish to use a
... Sound com-
centre speaker. This function can be fulfilled by
ponents
the TV speakers, if they are not used as front
speakers, or by an external speaker. In the
latter case, its lower limit frequency must be
entered in Hz (see instruction manual and
technical data of the speakers).
no TV speakers External speaker
Back with Proceed with
Select whether the TV speakers or an External
speaker is to reproduce the centre sound or no
if no centre speaker is connected.
If no centre speaker is connected, the front speakers
also transmit the centre sound parts additionally.
For External speaker go to the frequency bar
below and
set the Lower Limit Frequency of the external
front speakers in steps of 10 Hz.
Select the start value of the frequency response of
the speakers for the correct setting.
Proceed to connect the Subwoofer.
continued on the next page
100Hz 100Hz 100Hz
100Hz 100Hz
200 Hz
100Hz 90Hz 100Hz
100Hz 100Hz