Table of Contents
Advertisement
Loewe bild 5 oled / bild 4 oled
User handbook
System settings
Control
Automatic update via the internet
Your TV set checks at definite intervals whether a newer software than
the one installed in the TV set is available in the Internet. If this is the
case, you can find this out by a screen message.
In order to get informed about the new software, the TV set must
be connected to the Internet.
The Inform about new software item can also be switched on/
off at the end of initial installation.
Showing/Hiding information on new software
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Control,
go to next column.
Mark Software,
go to next column.
Mark Software update,
go to next column.
Mark Via Internet,
go to next column.
Mark Inform about new software,
go to next column.
...
yes
no
Select yes / no,
OK Adopt.
90
Here you can load new software from a USB storage
medium, via the internet or using aerial reception
(provided the respective prerequisites are provided).
New software package found
For the menu item Information on new software updates , yes
is selected (see left column).
If the TV set has found a new software version during the check, you
will be informed about this via a screen message.
Select the desired procedure.
SOFTWARE UPDATE WIZARD - New software
A new software version is now available and can be downloaded from the internet.
New software: V1.1.12.0
Please specify how you would like to continue:
Load new software now
Load software when switching off to standby
Load software later (max. 3 times notification)
Do not load this software version
Adopt with
Load the
After confirmation, the new TV software will be
software
loaded from the internet and then programmed.
now
Load the
The software will be loaded and programmed after
software
the TV set has been switched off into standby mode
when
for the next time. The display on the control panel
switch off to
will light up blue during the update.
standby
The TV set must not be switched off at the mains
before the downloading process is complete (control
panel display lights up white)!
Load the
Loading the software will be postponed to a later date.
software
The new software message will be displayed the next
later (at
time the TV set is switched on.
most
If the loading process is postponed three times then
three-fold
the message will only be shown again once the next
notification)
software version is available.
Do not
The new software will not be loaded. The on-screen
load this
message will only be shown again for the next soft-
software
ware version.
version
Confirm selection.
(Current software: V1.1.11.0)
OK
Advertisement
Table of Contents
