November 2023
4.2.1 AMS Device Manager
When the device has joined the network, it will appear in the
AMS Device Manager as illustrated in
transmitter communication, a Rosemount 708 device driver (DD) is
required. To obtain the latest DD, visit the Emerson Easy Upgrade site
at:
Software &
Figure 4-2: AMS Device Manager
4.2.2 Network connection troubleshooting
If the device is not joined to the network after power up, verify the
correct configuration of the network ID and join key and that Active
Advertising has been enabled on the Gateway. The network ID and
join key in the device must match the network ID and join key of the
Gateway.
To obtain the network ID and join key from the Gateway, go to
System Settings → Network → Network Settings page of the web
server (see
following table to change the network ID and join key.
Function
Join Device to
Network
Quick Start Guide
Drivers.
Figure
4-3). Follow the fast key sequence shown in the
Key sequence
2, 1, 2
Figure
4-2. For WirelessHART
Menu items
Network ID, Set Join Key
Quick Start Guide
®
23