Emerson Rosemount 708 Quick Start Manual page 17

November 2023
3.3 Device network configuration
To communicate with the Gateway (and ultimately the host system),
the transmitter must be configured to communicate with the wireless
network.
Using a Field Communicator or AMS Device Manager, enter the
network ID and join key so they match the network ID and join
key of the Gateway and other devices in the network. If they do
not match, the acoustic transmitter will not communicate with the
network. To obtain the network ID and join key from the Gateway, go
to Systems Settings → Network → Network Settings page on the web
server, shown in
Figure 3-1: Gateway Network Settings
3.3.1 Configure the network using AMS Device Manager
Procedure
1. Right click on the acoustic transmitter and select Configure.
2. When the menu opens, select Join Device to Network and
follow the method to enter the network ID and join key.
Quick Start Guide
Figure 3-1.
Quick Start Guide
17