Table of Contents
Advertisement
Maintenance
9.3 Corrective maintenance
9.3.11
Reassembly: Miscellaneous information
• Position all rating and supplementary plates as in the original state.
• Where relevant, fix electric cables.
• Check the tightening torques of all screws, as well as those of screws that have not been
released.
9.3.12
Optional add-on units
You can find additional operating instructions here: AUTOHOTSPOT
9.3.13
O-ring seal
If O-ring seals are present, you should check that they are in perfect condition and that the O-
ring seals are properly seated in the grooves between the components. Replace damaged O-
ring seals.
O-ring seals can be present on the following components, for instance:
• Adapters, tapers
• Entries, glands
• Bearing seals
• End shield seals
• Terminal box sealing
• etc.
144
1MB1.33 Eagle Line shaft heights 71 ... 315
Operating Instructions, 08/2023, A5E52990459A
Advertisement
Table of Contents
