Maintenance
9.3 Corrective maintenance
9.3.6
Links
● Replace any corroded screws.
● Take care not to damage the insulation of live parts.
● Document the position of any rating and supplementary plates that have been removed.
● Avoid damaging the centering edges.
9.3.7
Reassembly: Miscellaneous information
● Position all rating and supplementary plates as in the original state.
● Where relevant, fix electric cables.
● Check the tightening torques of all screws, as well as those of screws that have not been
released.
9.3.8
Optional add-on units
Note
Further documents
Observe all of the other documents provided with this machine.
You can find additional operating instructions here:Service & support (Page 139)
114
Standard motors SH 63 ... 355
Operating Instructions, 12/2018, A5E38483075A