Mowing Grass; Emptying The Grass-Catcher - hecht 5169 Translation Of Original Instructions For Use

Table of Contents

Advertisement

REVERSE
C Reverse must be engaged only when the machine has stopped moving.
EN
- When reversing, the blades must be disconnected and the mowing raised to the highest
possible position.
- Depress the clutch / brake pedal
- Place the throttle lever in the position between "SLOW" and "FAST".
- Select gear "R" with the gear lever
DE
- slowly release the clutch / brake pedal

MOWING GRASS

B
WARNING!
Don't touch the rotating blades. If you touch them, wait until the blades and all
CS
moving parts have come to a complete stop and secure the machine against
unintentional start-up. The blades will move for a while after the engine is switched
off or the blade control is disconnected. Risk of serious injury.
To start cutting:
- move the throttle to «FAST»;
SK
- raise the cutting deck as high as possible;
- engage the blades (see 6.3)
- start moving forwards on the grass very slowly and with utmost caution, as already
described;
- Adjust the cutting height and movement speed according to the lawn and terrain
conditions (lawn height, density and humidity and terrain irregularities are risk
PL
parameters.)
I
This machine is not designed for reverse mowing. If you engage reverse gear and
Note:
have the blades lowered, the engine will stop.
Whatever the conditions, always reduce the speed if you notice a drop in engine speed – if you travel
too fast compared to the amount of grass being cut, you will not be able to mow the grass well.
HU
Disengage the blades and raise the cutting deck as high as possible whenever you need to
get past an obstacle.
A
VAROVÁNÍ!
If you move this tractor from place to place at any time and in any way, the blades
must be disconnected and the cutting height must be set to the highest position.

EMPTYING THE GRASS-CATCHER

I
This operation can only be done with the blades disengaged, otherwise the engine
Note:
stops.
Do not let the grass-catcher become too full as this may block the collector channel.
When the grass-catcher is full you will hear a sound warning. At this point:
1.
Disengage the blades and the sound will stop;
42 / 68

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

51845196

Table of Contents