Table of Contents
Advertisement
•
Do not start the engine when standing in front of the discharge opening.
EN
BRAKE HANDLE
A
CAUTION!
In order to avoid any unintentional start-ups of the lawn mower, it comes equipped
with an engine brake.
DE
•
The engine brake is a basic safety feature of the mower. When the brake lever is released,
the engine and the blades must automatically stop. The deceleration time depends
on the condition and wear of the brake. If the brake doesn't work properly, contact an
authorised service centre.
•
Before mowing, you should check the brake function several times to make sure everything
CS
is in correct working order.
C During operation, hold the handle and the brake control lever firmly. If you release
the brake lever during the machine's operation, the engine stops.
TO STOP ENGINE
1.
Releasing the brake control lever stops the engine and also the blade.
SK
2.
Disconnect and ground the spark plug wire to prevent the mower from accidentally starting
if it's left unattended for a long period of time.
MOWING
B
WARNING!
PL
Before performing any of the steps described in the following steps, always stop
the engine and wait for the blade to stop rotating. In a case where it's necessary to
reach into the work area of the stopped blade, it's necessary to secure the engine
against accidental starting (e.g. by pulling the cable end of the spark plug).
HU
THIS WARNING WON'T BE REPEATED IN THE FOLLOWING STEPS.
GRASS CATCHER
1.
To fit: Raise the rear cover and hitch the grass catcher onto the holder on rear of mower
(fig. 9).
2.
To remove: grasp and lift rear cover. Lift the grass catcher out of the holder and backwards
to remove it.
•
If the grass catcher is full, empty and clean it and make sure it is clean and ensure its
meshwork is ventilated.
•
Emptying catcher before filling the maximum (at 50-70% content) will improve the collection
of grass.
28 / 48
Advertisement
Table of Contents
