General Operation; Setting Menu - Delta DPM-C320 Operation Manual

4.1 General Operation

1. Use UP and DOWN keys to switch among setting pages.
2. You can go back to HOME page by using BACK or INDEX (DPM-C520 / DPM-C520W) keys.
Note 1: use BACK key in HOME page to enter the setting page.
4.1.1

Setting Menu

HOME page (HOME):

Voltage values measured by the power meter, including total voltage (VT), total current (IT), total power
(PT), total positive active energy (ET). (DPM-C520 / DPM-C520W)
Voltage values measured by the power meter, including total voltage (V), total current (I), total power (P).
(DPM-C320)
Phase voltage (VLN): phase voltage values measured by the power meter, including phase A voltage

(AN), phase B voltage (BN), phase C voltage (CN ) and average phase voltage (T).
Line voltage (VLL): line voltage values measured by the power meter, including A-B line voltage (AB),

B-C line voltage (BC), C-A line voltage (CA), and average line voltage (T).
Electric current page (AMP): electric current measured by the power meter, including phase A current

(A), phase B current (B), phase C current (C) and average current (T).
Power factor page (PF): power factors measured by the power meter, including power factors of phase A

(A), phase B (B), phase C(C), total power factor (T) and frequency (Hz).
Active power, reactive power, and apparent power page (PQS): values measured by the power meter,

including total active power (PT), total reactive power (QT), and total apparent power (ST).
Active power page (WATT): active power value measured by the power meter, including active power of

phase A (A), phase B (B), phase C (C) and total active power (T).
Reactive power page (VAR): reactive power value measured by the power meter, including reactive

power of phase A (A), phase B (B), phase C (C) and total reactive power (T).
Apparent power page (VA): apparent power value measured by the power meter, including apparent

power of phase A (A), phase B (B), phase C (C) and total apparent power (T).
Positive active energy page (+WH): positive active energy measured by the power meter, including

positive active energy (PH).
Reversed active energy page (-WH): reversed active energy measured by the power meter, including

reversed active energy (PH).
Positive reactive energy page (+VARH): positive reactive energy measured by the power meter, including

positive reactive energy (QH).
Reversed reactive energy page (-VARH): reversed reactive energy measured by the power meter,

including reserved reactive energy (QH).
Positive apparent energy page (+VAH): positive apparent energy measured by the power meter,

including positive apparent energy (SH).
C h a p t e r 4 O p e r a t i o n
4 - 3
4_