General Operation; Setting Menu - Delta DPM-C530 Operation Manual

DP M- C5 3 0 O p er at i on Ma n ua l

4.1 General Operation

1. Use the UP and DOWN keys to switch among setting pages.
2. Use the MENU key to go back to Menu page.
Note 1: Use the ENTER key to enter a setting page and confirm the setting.
4.1.1

Setting Menu


Voltage Measurement: Voltage values measured by the power meter, including voltage L-N, voltage L-L,
voltage L-N unbalance, and voltage L-L unbalance.

Current Measurement: Current values measured by the power meter, including current and current
unbalance.

Power Factor, Frequency (PF, Hz): Power factor and frequency values measured by the power meter,
including power factor, displacement power factor, and frequency.
_4

Power Measurement: Power values measured by the power meter, including active power, reactive
power, and apparent power in each phase and in total.

Energy Measurement: Energy values measured by the power meter, including active, reactive, and
apparent electrical energy delivered and received.

Harmonic: Harmonic values measured by the power meter, including total harmonic distortion for voltage
and current in each phase and in total.

Demand: Demand values measured by the power meter, including demands for active power, reactive
power, apparent power and current of the last, present, predicted or peak demands.

Maximum: Maximum values measured by the power meter, including voltage, current, power factor,
frequency, power, harmonic, and demand.

Minimum: Minimum values measured by the power meter, including voltage, current, power factor,
frequency, power, harmonic, and demand.

Alarm: Power meter alarm parameters
1. Press MENU to display the setting menu.
2. Select a setting item.
3. Use UP and DOWN to switch among setting pages.
4. Press MENU to return to the setting menu.
Example: When you enter the option 1, you see the Voltage L-N setting page. Press DOWN to display
the Voltage L-L setting page. Press DOWN again to display the Voltage Unbalanced L-N setting page.
And when you press UP from here, you display the Voltage L-L setting page.
Note: Press ENTER in the demand settings pages of current, active power, reactive power and apparent
power to switch to the peak values date and time setting page. Press ENTER to return to the previous
page. The other keys have no function here.
4 - 2