Table of Contents
Advertisement
Function
Control power
Function
Rated current
RS-485
Wiring Descriptions
250 mA fuse:
Either positive or negative charge can be used on L1/+ and L2/-. When using a neutral wire for AC power,
※
you need to connect the neutral wire to the L2/-.
Always use a fuse on L1/+. When using an ungrounded neutral wire to connect to the power, use a fuse on
※
L2/-. If you are using a Power Transformer (PT) or a Current Transformer (CT), use fuses on the primary
and secondary windings.
The rated voltage / current of the fuse, breaker, and device should be the same to prevent damage to
※
electrical equipment or other property.
PIN
VOLTAGE
L1/+
100 ~ 240 Vac
L2/-
PIN
VOLTAGE
I1+
I1-
I2+
I2-
I3+
I3-
D+
D-
-7 ~ +12 VDC
Ch ap te r 2 Spec i fica ti ons
CURRENT
400 mA MAX
CURRENT
-
2_
1A ~ 5A
-
2 - 11
Advertisement
Table of Contents
