Advertisement
CHAPTER 3 ENGINE
Rocker Arm
When checking the rocker arm, check the inner
diameter of the valve rocker arm and wear of the
camshaft contact surface.
Rocker Arm I.D. : .000~12.018mm
Tool: Dial Calipers
Assembly
Note: Intake rocker arm shaft A has oil holes.
Apply engine oil to rocker arms and shafts;
Install rocker arms and tighten rocker arm shaft to
the specified torque:
Rocker Arm Shaft Bolt: 28N•m
Cylinder Had
Disassembly
Remove intake pipe
Remove water temperature
thermostat cover ②
①and
sensor
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE
PAGE. 3- 48
Advertisement
Chapters
