Advertisement
CHAPTER 6 BRAKES
difference between measurements
3. Mount dial indicator as shown to measure disc
runout on the dial indicator. Replace the disc if
runout exceeds specifications.
Brake Disc Runout
Service Limit 0.005" (0.127 mm)
REMOVAL/ REPLACEMENT
1. Removal wheel/ hub and caliper.
2. Remove bolts and disc from the flange.
3. Clean mating surface of disc and hub.
4. Install new disc on flange.
Tighten to specified.
Rear Brake Disc Mounting Bolt Torque :
18 ft. lbs. (25 Nm )
CAUTION:
Always use new brake disc mounting bolts.
T-Boss 550 SERVICE MANUAL20.0
CHAPTER 7
BRAKES
PAGE. 7- 14
Advertisement
Chapters
