Advertisement
CHAPTER 3 ENGINE
Shift Cam, Shift For
Install shift can① and shift fork②
Check each part for smooth turning
Install low range driven gear to counter shaft③
Spray adequate engine oil to each part.
Drive Bevel Gear
Install drive bevel gear and tighten to the specified
torque.
Drive bevel gear tightening torque: 32N. m
Material: Thread Locker
Right Crankcase
Driven Bevel Gear
Install driven bevel gear and tighten to the specified
torque.
Driven bevel gear tightening torque: 25N. m
Check bevel gear backlash
Front Output Shaft
Install front output shaft to right crankcase
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE
PAGE. 3- 86
Advertisement
Chapters
