Advertisement
CHAPTER 7 ELECTRICAL
*
7. Pickup coil resistance
Disconnect the pickup coil coupler
from the wire harness.
Connect the pocket tester (Ω 100) to
the pickup coil coupler.
Tester (+) lead →
BI/Y Terminal
Tester (- ) lead→
B/R Terminal
Check the pickup coil has the
specified resistance.
Primary coil resistance:
115 -145Ω (20℃)
MEETS
SPECIFICATION
8.Main switch
CHECK SWITCHES
CONTINIUTY
9.Wiring connection
Check the connection of the
entire ignition system
Refer to "CIRCUIT DIAGRAM".
CORRECT
Replace the igniter unit.
T-Boss550 SERVICE MANUAL 20.0
OUT OF SPECIFICATION
Replace the pickup coil.
NO CONTINUITY
Replace the main switch
NO CONTINUITY
Correct
CHAPTER 7 ELECTRICAL PAGE.7-
9
Advertisement
Chapters
