Advertisement
CHAPTER 3 ENGINE
Install the new gasket (3);
Install chain tensioner screw, tighten it to the
specifiedTorque
Chain tensioner screw tightening torque: 8 N· m
Valve Adjuster Cover
Use new rubber gasket and apply grease;
Install Valve Inspection Cap
Install valve inspection cap bolt;
Spark Plug
Install spark plug with special tool and tighten to the
specified torque;
Note: To avoid damage to the cylinder head thread,
screw in the spark plug with hand first, then
tighten it to the specified torque with spark plug
wrench.
Spark plug tightening torque: 18N•m
Tool: Spark Plug Wrench
Engine Periphery
Left Side Cover
Install left side cover
Install the bolts
Valve Inspection Cap
Install valve inspection cap
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE
PAGE. 3- 99
Advertisement
Chapters
