Advertisement
CHAPTER 5 FINAL DRIVE
13. Remove the PIN SHAFT (NO.38), SHIFT
FORK (NO.39).
→Fig 14
Fig 14
14．Remove the DRIVE CLUTCH (NO.23).
→Fig 15.
Fig 15
15．Inspect the bearing (NO.26). If the bearing
was damaged, remove the RETAINER (NO.25)
first, and then remove the bearing (NO.26).
→Fig 16.
T-Boss550 SERVICE MANUAL 20.0
Fig 16
16．Remove the DRIVE CLUTCH COVER
(NO.24).
→Fig 17.
Fig 17
18．Remove the OIL SEAL (NO.5).
→Fig 18.
CHAPTER 5
FINAL DRIVE. 5- 27
Advertisement
Chapters
