Table of Contents
Advertisement
Spectral PC 1200Z IP65
Reset
In this submenu you can restore the default factory settings of the device. This submenu requires a
password. The default password is pressing the UP/DOWN buttons in the following order: UP, DOWN, UP,
DOWN.
01) Enter the password.
02) Press the ENTER button to confirm the password and start the reset. During reset the display will show:
When the reset is completed, the display will show OK.
03) Press any button to return to the main menu.
Note:
Calibration changes made in 6.6.10 Calibration cannot be reset.
DMX Error
In this submenu you can determine the behavior of the device in case of a DMX failure.
01) Press the UP/DOWN buttons to toggle between the following 2 options:
●
SAVE:
●
BLACK:
02) Press the ENTER button to confirm your choice.
Key
In this menu you can activate the display lock.
01) Press the UP/DOWN buttons to toggle between ON and OFF.
●
ON:
●
OFF:
02) Press the ENTER button to confirm your choice.
Note:
If you turn off the display lock, this will not affect the submenus which by default require a password.
Product code: 43552
The device will use the last properly received DMX signal
The device will black out the light output
The display lock is on. The display turns off after 25 seconds of inactivity. To
access the main menu, you need to enter the password. The default
password is pressing the UP/DOWN buttons in the following order: UP, DOWN,
UP, DOWN
The access to the main menu remains unlocked after the display turns off
27
Advertisement
Table of Contents
