Print With Dual Origins - Canon Arizona 2300 Series Operation Manual

Print With Dual Origins

Introduction
Due to the larger table size and the vacuum zone arrangement of the Arizona 2300 XTF printer, it
is possible to print in an alternating 2-up arrangement using Origin A and Origin B for placement
of the image.
Dual Origin is used to print more than one copy of a specific print job on media not larger than
1.25 x 2.5 meters (4 x 8 feet). This allows greater productivity when printing multiple panels.
If the dimensions of your image are not greater than 1.25 x 2.5 meters (4 x 8 feet), the Dual Origin
option is available from the Job parameters menu.
NOTE
It is also possible to select Dual Origin in the ONYX workflow application. In Layout preview, the
Preferred Origin field can be selected from a pull-down menu with the choices Origin A, Origin
B, or Dual Origin Mode. If you don't select Dual Origin it can still be made active after the job is
sent to the print job queue, as explained below.
Print With Dual Origins
Chapter 4 - Operate the Printer 81