Canon Arizona 2300 Series Operation Manual page 31

Avoid these Situations For Your Personal Safety
[3] Do not push gantry
[4] Hot UV Lamps
[5] Carriage Crush Hazard
Do not push or force the gantry to
move manually if it is already in mo-
tion. If you do move the gantry, a Mo-
tion Error message will display and
you will have to use the mouse to click
Reset on the user interface LCD dis-
play.
When the Maintenance Station is open
to perform printhead maintenance, do
not touch the UV LED unit assembly as
it can be hot. Also be aware that the
carriage will move up or down when
the Raise Carriage switch is pushed.
Movement of the carriage up and
down may be a crush hazard. Do not
rest your hands in this area during dai-
ly printhead maintenance as this proc-
ess causes the carriage to move up
and down.
Chapter 2 - Safety Information
Safety Awareness
4
31