Canon Arizona 2300 Series Operation Manual page 41

Component
10) Registration Pins
11) Vacuum Gauge
12) Ink Filters
(13) Coolant Bottle
(14) Vacuum Table Foot
Switch
(15) Ink Bay
10
9
11
15
12
14
Function
Allow the operator to register media by placing it against the pins.
Registration pin operation can be set at the user interface to work
in either manual or automated mode. Pins can be enabled or disa-
bled individually.
Displays the strength of the table vacuum system. If it reads less
than 10"Hg, check for vacuum leaks.
Remove unwanted particulate matter from the ink. Ink filters are
located behind a door under the ink bags.
Provides coolant to maintain correct temperature of the ink in the
printheads.
Toggles the pump that turns the table vacuum on/off. Vacuum
must be on prior to starting a print.
There are two ink bays: the Primary bay contains CMYK ink and
the coolant bottle; the Secondary bay holds any additional suppor-
ted color channels.
10
13
Operator Interface Hardware
10
10
Chapter 3 - Navigate the User Interface
15
12
41