Weekly
AMS Printhead Maintenance
Clean Printheads
Empty the Waste Trays
Monthly
Replace UV LED unit Filters
Clean Linear Gantry Rails
Clean UV LED unit window
Check Coolant level
Incident based, as needed
Clean Horizontal Surfaces
Remove Ink from Table
Clean the covers around the Spit
Tray
Needed when indicated on the oper‐
ator panel
Bleed ink filter
After 5 Bags
(CMYK)
Bleed ink filter
After 1 Bag
(White)
Change Ink Fil-
After 50 liters of
ters
ink, or if pigment
looks weak
Procedure
Automatic Printhead Maintenance (AMS) on page 180
•
•
Clean Printheads on page 190
Empty Ink Waste Trays on page 196
•
Procedure
Replace the UV LED unit Filter on page 193
•
Clean the gantry rails on page 202
•
Clean UV LED Quartz Window on page 200
•
Fill the Coolant Bottle on page 201
•
Procedure
Clean Horizontal Surfaces on page 184
•
Remove Ink from the Table on page 195
•
Procedure
Bleed an Ink Filter on page 207
•
Bleed an Ink Filter on page 207
•
•
Change Ink Filter on page 204
Maintenance Guidelines
Chapter 9 - Printer Maintenance
175