Replacing The Battery - Angelcare AC25 User Manual

TESTING THE SENSOR PAD FOR USE
IMPORTANT INFORMATION
• Sources of vibration & movement other than your baby can be detected by the
Movement Pad and interfere with the performance of your Angelcare monitor.
The alarm will not sound if it detects movement other than your baby's.
• There are 4 sensitivity settings. The unit is set at level 3 (default) and can be adjusted
accordingly.
• The Movement Pad will detect false movements if you are touching the cot.
• The Monitor will produce a single beep tone designed to alert parent/carer if no
movement is detected for 15 seconds. If no further movement is detected, the main
alarm will sound at 20 seconds - a series of continuous beeps.
SETTING UP & CHANGING THE SENSOR PAD BATTERY
The sensor pad is designed to detect subtle baby movements on the surface of the mattress.
The alarm will only sound if no movements are detected after 20 seconds.1.21
SETTING UP
1. Remove the tab from the battery holder.
2. Remove the mattress from the cot, and place the sensor pad (Angelcare logo side up) on
the base in the centre of the mattress, it should be centred on the hardboard.
3. Replace the mattress

REPLACING THE BATTERY

1. Use a sharp object to slide the dual lock up into the unlocked position (see image1&2)
and at the same time use a coin to remove the battery cover and insert the battery face
with the + face up.
2. Replace the battery cover align 2 dots and click to secure also ensure the dual lock is
down in the locked position (see image 3&4)
Unlocked position
1
AC25_BabyMovementMonitor_Manual_Final.indd 3 AC25_BabyMovementMonitor_Manual_Final.indd 3
2 3
Locked position
4
ANGELCARE – Model AC25 | 3
2023-07-12 13:47 2023-07-12 13:47