Page 1
FOR YOUR PEACE OF MIND OWNER’S MANUAL VIDEO & SOUND MONITOR Model AC1120 IMPORTANT ADVICE FOR INITIAL SETUP Batteries Insert the enclosed rechargeable batteries into the Parent Unit. If inserted incorrectly the Parent Unit will not charge when placed in the charging cradle. The battery icon will flash briefly on the Parent Unit screen to indicate charging.
United States and Canada: please contact us at: angelcare@cdecinc.ca Other countries: please contact your local distributor. This Angelcare Monitor is a Personal Care Product. Please DO NOT return this to the store where you purchased it from. If you have any questions or require assistance please call the Angelcare Helpline on 0345 009 1789 or email helpline@babyhelpline.co.uk.
WARNINGS 1. THIS PRODUCT CANNOT REPL ACE 9. This product is NOT a toy. DO NOT allow RESPONSIB LE ADU LT SU PERVISION . children to play with it. This product is designed to aid in the monitoring of your child. When using 10.
Page 4
13. IMPORTANT SAFETY INSTRUCTIONS tripod, bracket or table recommended by the manufacturer or sold with the product. Any mounting of the product should follow 13.1 Read these instructions - All the safety the manufacturer’s instructions. instructions should be read before the product is operated.
Page 5
13.20 WARNING Strangulation Hazard — 14.8 Exercise care in handling batteries Children have STRANGLED in cords. Keep in order not to short out the batteries adapter cords out of with conducting materials such as rings, the reach of children bracelets and keys. Overcharging, short circuiting, reverse charging, mutilation, or (more than 1 m away).
Page 6
WARNING (North America Only) 15.4 This device complies with the part 15.1 Modifications not authorized by the 15 of the FCC Rules and the Industry manufacturer may void users authority to Canada licence - exempt RSS standards(s). operate this device. Operation is subject to the following two conditions: 15.2 NOTE : This equipment has been...
SETUP REQUIREMENTS VIDEO & SOUND MONITOR Model AC1120 INCLUDED: Rechargeable Nursery Unit Charging Cradle Parent Unit 2 AC Adapters 3 Rechargeable AAA Belt Clip Batteries for Parent Unit WHAT YOU WILL NEED (NOT INCLUDED): Miniature Philips 3 AAA Alkaline Screwdriver...
STEP 1 - CHARGING THE PARENT UNIT (10 HOURS) IMPORTANT Never use regular alkaline batteries in the Parent Unit; they may explode. 1) Remove the Belt Clip. 2) Remove the battery door and insert the Rechargeable Batteries (included). 3) Connect the AC Adapter to the Charging Cradle and into an electrical outlet.
STEP 2 - SETTING UP THE NURSERY UNIT 1) Remove the battery door and insert 3 AAA Alkaline Batteries (not included). 2) Place the Nursery Unit at a minimum of 1 meter away from the crib. 3) Connect the AC Adapter to the Nursery Unit and into an electrical outlet.
STEP 3 - TURNING ON YOUR MONITOR 1) Press the Parent Unit ON/OFF button for 2 seconds until blue screen appears. 2) Push and hold the Nursery Unit left ‘wing’ button for 2 seconds. 3) The Parent Unit will display Video mode screen.
AC adapters provided. This product is not a toy. Never allow children to play with it. STEP 4 - TESTING AND GETTING TO KNOW YOUR MONITOR The Angelcare monitor can be used with the pre-program factory settings or you can ®...
Page 12
TO TEST SOUND: IF YOU HEAR NO SOUND: • Check that both units are powered on. Ask someone to speak into the Nursery Unit or place the unit near a radio to ensure • Check that both units are plugged into functioning electrical outlets.
Page 13
YOU ARE NOW READY TO USE YOUR MONITOR The Angelcare ® monitor can be used with the pre-program factory settings or you can also customise your settings to your preference. DEFAULT SETTINGS Sound Mode: ON Speaker Volume: Level 3 (of 6)
STEP 5 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS IMPORTANT All changes and adjustments made When in the menu or sub-menu in the main menu and modes, sound transmission between sub-menus will not be the Parent Unit and the Nursery Unit activated unless you will be temporarily deactivated.
Page 15
5.2 - ALARM Allows you to select your preferred alarm mode for the Parent Unit. 1) Press the Menu icon to access main menu. 2) Press the Settings icon to access sub-menu. 3) Press the Alarm icon to change the alarm mode. 4) Press OK to confirm.
Page 16
Temperature Alarm icon: Indicates temperature alarm is active. TO SET THE TEMPERATURE RANGE: 1) Press the Menu icon to access main menu. 2) Press the Temperature icon to access sub-menu. 3) Press (+ or -) to set maximum temperature range (15 to 32 ˚Celsius). ºC 4) Press (+ or -) to set minimum ºF...
Page 17
5.5 - SCREEN SAVER Allows you to set the screen saver starting point. 1) Press the Menu icon to access main menu. 2) Press settings icon to access sub-menu. 3) Press the Screen Saver icon to select the delay before video mode turn into screen saver mode.
Page 18
5.7 - NIGHT LIGHT Allows you to use your monitor as a night light. TO ACTIVATE THE LIGHT: Push right ‘wing’ of Nursery Unit to the night light ON or OFF. 5.8 - ZOOM MODE Allows you to zoom in to twice the normal view. 1) Press the Zoom icon.
Page 19
5.10 - KEY TONE Allows you to activated or deactivate key tone sound. 1) Press the Menu icon to access main menu. 2) Press the Settings icon to access sub-menu. 3) Press icon to activate or deactivate key tone sound. 4) Press OK icon to confirm.
TROUBLESHOOTING TAKING CARE OF YOUR RECHARGEABLE BATTERIES • Ensure that you fully charge your batteries for 10 hours before their first use. • To maintain maximum battery life it is recommended that you fully discharge your batteries periodically. Battery performance can be diminished by leaving the batteries constantly charging on the charging cradle.
® ® sound monitor (model AC1120) is free from any material and workmanship defects, for a period of one (1) year from the date of the original purchase. If this monitoring system fails to function properly when used as directed under normal conditions within the one...
Unit and Nursery Unit is made on the 7.5V DC Adapter for Nursery Unit. 2.4GHz frequency. 3 AAA rechargeable batteries and 7.5V DC Hereby, Angelcare Monitors Inc, declares adapter for Charging Base for the Parent this baby monitor is in compliance with the Unit.
Page 26
Angelcare Helpline on 0345 009 1789 Website: www.angelcare.co.uk Email: helpline@babyhelpline.co.uk NOTE: Helpline is open Monday to Friday, 10am to 4pm, excluding bank holidays. Megababy is the only authorised dealer for Angelcare Spare Parts in the UK & Ireland.
Need help?
Do you have a question about the AC1120 and is the answer not in the manual?
Questions and answers