Accessories - Raingutter - Shadowspec UNITY Owner's Manual

Accessories - Raingutter

Congratulations on your acquisition of a Shadowspec Unity umbrella and an accompanying rain gutter.
It is important to operate your raingutter with care.
Step 1 Deploy your Shadowspec Unity Umbrella.
Step 2 Remove the Raingutter from the bag.
Step 3 On the Raingutter, pull the slider body all the way to the base of the zip so it lines up with the Retainer Box.
Step 4 Locate the insertion pin on the canopy of your Shadowspec Unity.
Step 5
Slide the insertion pin through the Slider Body and into the Retainer Box.
Step 6 Pull the Tab and Slider Body to the opposite side of the umbrella.
Step 7 Repeat the above process for the other side of the raingutter.
Step 8 Reverse the process to remove the raingutter when finished.
Slider Body
Tab
Canopy Zip Location
Insertion Pin
Retainer Box
31