Advertisement
Quick Links
Setting up the Shadowspec Protection Cover
1.
Remove your Protection Cover and the
supplied Rod from the packaging.
PROTECTION COVER ROD
2.
Assemble your Protection Cover Rod to full length.
3.
Unfold and unzip your Protection Cover.
4.
Locate the opening to the Rod Channel on the inside left flap of the Protection Cover.
Inside the Left Flap
NOTE:
The channel opening can be hard
to find. It is quite small.
5.
With care, slide the Rod into the channel. It goes
all the way to the top of the Protection Cover.
The bottom of the rod will fit into the base
of the channel, concealing it.
Locate the Rod Channel
TIP:
You can see the stitching on the outside has
a gap; this is an indicator of the location of
the channel entry point.
www.shadowspec.com
Shadowspec Serenity™ & Unity™
FOLDED PROTECTION COVER
6.
Your Protection Cover is now
ready to use.
The Outside Seam
PTO for the Operation Guide
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Shadowspec Serenity
Summary of Contents for Shadowspec Serenity
- Page 1 Setting up the Shadowspec Protection Cover Shadowspec Serenity™ & Unity™ Remove your Protection Cover and the supplied Rod from the packaging. PROTECTION COVER ROD FOLDED PROTECTION COVER Assemble your Protection Cover Rod to full length. Unfold and unzip your Protection Cover.
- Page 2 Setting up the Shadowspec Protection Cover Shadowspec Serenity™ & Unity™ Close your umbrella as per Straighten and fold the Canopy to compress the instruction manual. its size before using the supplied Canopy Strap to secure the Frame and Canopy. This ensures your umbrella fits inside the Protection Cover Using the rodded side of the Cover, manoeuvre the Cover over the top of your closed umbrella.
Need help?
Do you have a question about the Serenity and is the answer not in the manual?
Questions and answers