Table of Contents
Advertisement
Top Bridge Shroud Replacement
This procedure will give access to upright hardware and internal console cabling.
Tools Required:
• Phillips screwdriver
• Torque wrench
Time:
45 minutes
Disconnect Power Source
Unplug power cord from power outlet.
WARNING: Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Remove Heart Rate Grips
1. Remove four screws securing upper and lower heart rate grips to handlebar using a Phillips screwdriver.
2. Remove the white heart rate wires from the upper heart rate grips.
3. Remove the black heart rate wires from the lower heart rate grips.
Remove Rear Console Shroud Assembly
1. Remove four screws securing rear console shroud assembly to console support weldment using a Phillips
screwdriver.
Item
1
2
3
Item
1
Rear console shroud assembly
2
3
Page 77 of 98
Description
Upper heart rate grip
Lower heart rate grip
Screw
Description
Console support weldment
Screw
Qty
2
2
4
Qty
1
1
4
Advertisement
Table of Contents
