2. Remove four deck mounting bolts using a 4 mm Allen wrench.
3. Remove deck out of striding belt.
Install Deck
1. Slide deck into striding belt.
2. Install four deck mounting bolts using a 4 mm Allen wrench. Torque to 2.5 ft. lbs (3.4 Nm).
3. Align the striding belt so it is centered laterally on the front and rear rollers.
4. Partially tighten the two tensioning bolts using an 8 mm Allen wrench.
Item
1
2
3
4
Item
1
2
3
4
Item
1
Page 14 of 98
Description
Striding belt
Bolt
Deck
Frame
Description
Striding belt
Bolt
Deck
Frame
Description
Tensioning bolts
Qty
1
4
1
1
Qty
1
4
1
1
Qty
2