Table of Contents
Advertisement
Remove Incline Home Switch
1. Remove the two cables from incline home switch, noting the colors of wire insulation and their positions on incline
home switch.
2. Remove screws from the adapter plate using a Phillips screwdriver.
3. Remove adapter plate and switch assembly from frame.
4. Noting the orientation, push tabs on incline home switch together, pushing it out of the adapter plate.
Install Incline Home Switch
1. Noting the orientation, push incline home switch into adapter plate until you hear an audible click.
2. Place adapter plate and switch assembly into frame.
Item
1
2
Item
1
2
Item
1
2
Page 47 of 98
Description
Screw
Incline home switch cables
Description
Adapter plate
Incline home switch tabs
Description
Adapter plate
Incline home switch tabs
Qty
3
2
Qty
1
2
Qty
1
2
Advertisement
Table of Contents
