Table of Contents
Advertisement
Remove Anti-Slip Rails
1. Remove screw securing anti-slip rail using a Phillips screwdriver.
2. Remove anti-slip rail from base frame assembly by sliding backwards.
3. Repeat steps for other anti-slip rail.
Remove Rear Roller
1. Loosen striding belt by removing the two tensioning bolts and washers at rear of the treadmill frame using an 8
mm Allen wrench.
2. Push rear roller forward, then lift and slide out of frame.
Item
1
Item
1
Item
1
2
3
4
Page 65 of 98
Description
Screw
Description
Anti-Slip Rail
Description
Rear roller
Frame
Bolt
Washer
Qty.
1
Qty.
1
Qty
1
1
2
2
Advertisement
Table of Contents
