Rack Mounting; Connections; Intercom - RTS TIF-2000A User Manual

Installation and Operation

Rack Mounting

There are two options for rack mounting the TIF2000A. If a single unit is to be rack mounted, attach an MCP-2 rack mount kit.
If two units are to be mounted side-by-side, attach an MCP-1 rack mount kit. See Figure 4, for a depiction of the two rack
mount kits.
FIGURE 4.

Connections

Intercom

Use either of the "To Matrix" connectors (but not both) to connect to an intercom port. The intercom port that you connect to
will determine the address of the unit (see "Intercom Port Address" on page 5). Cable wiring diagrams are shown in Figure 5
and Figure 6. An LED labeled "Data" is located next to the Matrix connectors and serves as a basic indicator of data flow.
10
Password Configuration
TABLE 4.
PW
Length
4
3
2
1
Rack Mount Kits
SW7 SW8
OFF OFF
ON OFF
OFF ON
ON ON