Connect The Drop-In Charger With Ac Adaptor; Charging The Battery Pack - Uniden UH220 Series Owner's Manual

Getting Started

Connect the Drop-in Charger with AC Adaptor

Plug one end of the AC adapter into a wall outlet and the other end into
the drop-in charger.
If you use the drop-in charger in a mobile vehicle with 12V DC power,
use the optional cig-lead adaptor.
When the charger is powered, the LED illuminates green.
Charging the Battery Pack (Drop-In Charger)
Your radio is powered by a specially designed Lithium Ion battery pack.
• Before operating the UH220, charge the Lithium Ion battery pack
for 5 hours without interruption in the drop-in charger.
For the initial battery charge, make sure the radio is off for
optimum charging.
NOTE
1. Place the UH220 in the drop-in charger.
2. If the radio battery is charging, the LED illuminates red and stays on,
until fullycharged, then it illuminates green.
• The charger won't overcharge the battery pack.
When charging is completed, the charge LED changes colour from red
to green.
• You can monitor incoming calls while the UH220 is in the drop-in
charger.
• Do not transmit when the UH220 is in the drop-in charger!
Charging the Battery Pack (USB-C charging)
The battery pack can also be charged directly with an optional standard
5V USB to USB-C cable, connected to a standard 5V USB charging port.
UNIDEN UH220
9
Handheld UHF-CB Transceiver