Getting Started
Attaching the Antenna
The UH785 comes with a precision tuned
477MHz antenna for UHF-CB use.
Attach the antenna to the UH785.
Be sure the antenna is firmly seated.
Attaching the Beltclip
The belt clip may be pre-installed for convenience.
To attach the belt clip:
1. Align the belt clip over the 2 screw holes
on the back of the UH785 body.
2. Use a suitable Philips screwdriver to fasten
the 2 belt clip screws to the UH785 body.
To remove the belt clip:
1. Use a suitable Phillips screwdriver to loosen
the 2 belt clip screws to release the belt clip
from the UH785 body.
7
UNIDEN UH785
Handheld UHF-CB Transceiver