Table of Contents
Advertisement
Playing content on the
display panels
Learn how to play images, video, and audio on the display panels.
Playing media over the network
Play content available on the same network as the display panel.
For higher playback quality, Christie recommends using a wired connection when connecting the
display panel to other devices.
Third party software such as Nero MediaHome may be required to share content over the network.
1. Configure the display panel to connect to a wired or wireless network.
2. On the display panel remote, press Media Browser.
3. Select the media type and press OK.
4. Select the media server or network to connect to and press OK.
To refresh the device list, on the remote, press the green button.
5. If the selected media type is video, navigate to the location of the video files and select the file
to play.
6. To play other media types, go back to main Media Browser menu and select the media type
and the network again.
To switch to next media type quickly without changing the network, press the blue button.
7. Play the selected content.
•
To play all files in the list as a loop, in their original order, start playback with the Play
button and activate
•
To play the same file continuously, start playback with the OK button and activate
•
To shuffle all files in the list once, start playback with the Play button and activate
•
To shuffle all files in the list indefinitely, start playback with the Play button and activate
and
.
8. To exit the menu, on the remote, press Menu again.
Related information
Connecting to a wired network (on page 19)
Connecting to a wireless network (on page 19)
Access II Series LCD Panel User Guide
020-001836-01 Rev.1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
.
.
.
24
Advertisement
Table of Contents
