Selecting The Audio Destination; Connecting To A Wired Network; Connecting To A Wireless Network - Christie UHD862-L User Manual

When a new CEC source device is connected, the connected HDMI port name is replaced with
the name of the CEC source device in the Source menu.
6. To exit the menu, on the remote, press Menu again.

Selecting the audio destination

Configure whether the audio is played through an amplifier or through the display panel.
Compatible audio devices must support System Audio Control.
1. On the display panel remote, press Menu.
2. Enable the CEC option (on page 18).
3. Select System > Settings > More > Speakers.
4. Select the destination for the audio.
• Display—All audio is played through the display panel speakers.
• Amplifier—All audio is played through the connected sound system, the display panel
speakers are muted, and the volume is controlled using the remote for the display panel.
The display panel also supports also ARC (Audio Return Channel) feature. This is an audio link
meant to replace other cables between the display panel and the audio system.
When ARC is active, the audio of the display panel is not muted automatically. To hear audio
from connected audio devices only, the volume of the display panel must be turned down
manually.
5. To exit the menu, on the remote, press Menu again.

Connecting to a wired network

For wired connections, connect the display panel to the modem or router with an Ethernet cable.
1. On the display panel remote, press Menu.
2. Select System > Settings > Network/Internet Settings > Network Type.
3. Select the Wired device network connection.
4. If necessary, configure the network connection.
a) Select Advanced Settings and press OK.
b) Change the IP address setting to Manual and type the IP address for the display panel.
c) To save the settings, press OK.
d) Repeat steps 4b and 4c for the DNS settings.
5. To exit the menu, on the remote, press Menu again.

Connecting to a wireless network

Content stored on a mobile device connected to the wireless network can be accessed and displayed
on the display panel through the Media Browser.
Access II Series LCD Panel User Guide
020-001836-01 Rev.1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Installing a display panel
19