2. To open WakeOnLAN, select the downloaded file and click New Host.
3. Select the Wake Up page.
a) Enter the MAC address, which is the same as the display panel.
b) Enter the broadcast IP address.
The domain is the same as the computer.
For example, the IP address of the computer is 10.0.21.105, the subnet mask is
255.255.0.0, and the broadcast IP address is set to 10.0.255.255.
4. Enter any IP address in the FQDN/IP.
Leave all other fields at their default values.
5. Select the newly added host, right-click, and select Wake Up.
Rotating the on-screen display
Change the orientation of the on-screen display.
1. On the display panel remote, press Menu.
2. Select Signage Settings > Controls > OSD Orientation and select the appropriate
orientation.
3. To exit the menu, on the remote, press Menu again.
Access II Series LCD Panel User Guide
020-001836-01 Rev.1 (09-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Installing a display panel
21