Table of Contents
Advertisement
5 OPERATION
Electrode
6 mm (1/4")
8 mm (5/16")
10 mm (3/8")
MMA welding
MMA welding may also be referred to as welding with coated electrodes. Striking the arc
melts the electrode, and its coating forms protective slag.
For MMA welding the power source shall be supplemented with:
•
welding cable with electrode holder
•
return cable with clamp
MIG/MAG and self shielded cored wire welding
An arc melts a continuously supplied wire. The weld pool is protected by shielding gas.
For MIG/MAG and self shielded core wire welding, the power source shall be supplemented
with:
•
wire feed unit
•
welding torch
•
connection cable between power source and wire feed unit
•
gas cylinder
•
gas regulator (not needed for self shielded core wire welding)
•
return cable with clamp
0463 441 101
Recommended for gouging
Voltage min.
36 V
39 V
43 V
- 20 -
Voltage max.
49 V
52 V
52 V
Electrode Extension
50 - 76 mm
(2 - 3")
© ESAB AB 2022
Advertisement
Table of Contents
