ESAB Warrior 350i MV CC Instruction Manual page 12

3 TECHNICAL DATA
Insulation class
Enclosure class
Application class
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40 °C / 104 °F, or below.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
0463 441 101
Warrior™ 350i MV CC/CV Warrior™ 400i MV CC/CV
- 12 -
H
IP23
© ESAB AB 2022