Folding; Control System Programme - Quickie Q50 R Carbon Directions For Use Manual

4.4 Folding

When the wheelchair needs to be folded, please pull up the latch
at the rear of the backrest whilst pushing the backrest forward
(Fig. 4.12). Then with one hand on the seat cushion and one on the
backrest, fold the wheelchair. With the wheelchair body folded in
place, flip up the footrest, the wheelchair can be placed standing up.
(Fig. 4.13 - 4.16)
To keep the frame compact when lifting the wheelchair, apply the
velcro strap and pull it tight so that the wheelchair doesn't collapse
(Fig. 4.15).

4.5 Control system programme

This wheelchair is equipped with a control system that can be
programmed by adjusting settings within the system. This is a
specialized job that needs training and can only be adjusted with
professional software. The end user is not allowed to adjust these
settings.
DANGER!
The incorrect setting of the parameters for the control system may
result in injury. Settings must be made by qualified specialists.
Rev. B English 15
Fig. 4.13
Fig. 4.15
Q50 R Carbon
Fig. 4.12
Fig. 4.14
Fig. 4.16