Bellfires VERTICAL BELL SMALL 3 CF Instructions For Use & Manual Daily Maintenance page 19

Bellfi res
STAND-BY MODE (PILOT LIGHT)
AM
PM
ON
OFF
1 2
SETTING THE FLAME HEIGHT / EXTINGUISHING THE FIRE (STAND-BY)
AM
PM
ON
OFF
1 2
AM
Instructions for use
• Press button and hold to set appliance to
pilot light.
We recommend to let the pilot light
burn in the winter months, to prevent
condensation on the inside of the glass.
Gradually decrease fl ame height / Extinguishing
the fi re
• After ignition, the burner automatically sets the
fl ames to the maximum height.
• Press button to lower the fl ames and to turn
off the burner. (Extinguishing the fi re: Press
button and hold: pilot light remains burning
(standby position)!)
(Pressing briefl y the
the fl ames to the low position.)
Flame height directly to minimum position
• Pressing the
lowers the fl ames to the low position. (When this
happens, the fl ames will fi rst automatically go
to maximum!) This is indicated by "
display.
Note: Backlight must be on for high fi re and
low fi re double-click operation!
2x
button gradually lowers
button twice, automatically
English
" on the
19