Bellfires VERTICAL BELL SMALL 3 CF Instructions For Use & Manual Daily Maintenance page 16

Bellfi res
Figure 3: Receiver "RESET"
Burner:
The appliance's entire burner consists of a "front burner" and a "rear burner".
Burner operation described below applies to:
1 Both "front burner" and "rear burner".
(The -symbol (AUX -function) on the hand-held transmitter's display is visible.)
or
2 Only "front burner". The "rear burner" is turned off.
(The -symbol (AUX -function) on the hand-held transmitter's display is not visible.)
2.4.3 Operation (Remote control)
MANUAL MODE (HAND-HELD TRANSMITTER)
SWITCH ON THE APPLIANCE / IGNITING THE FIRE
• Open the gas supply valve in the gas pipe to the fi re.
Warning
When the pilot light is ignited, the motor turns
automatically to maximum fl ame height.
16
button
English
Instructions for use