Advertisement
Bellfi res
AM
PM
ON
OFF
1 2
AM
PM
ON
OFF
1 2
IMPORTANT: SETTING UP SIGNAL CODE BEFORE USING THE APPLIANCE
FOR THE FIRST TIME
Before the appliance can be used, the receiver must fi rst learn the hand-held
transmitter's signal code.
• Press the "RESET" button on the receiver, and keep this pressed until 2 beeps are
heard. See fi gure 3.
Release the "RESET" button after the second (somewhat longer) beep.
• Press, within 20 seconds, the
until 2 short beeps are heard. The signal code has now been set up on the receiver.
If, however, a single long beep is heard, this means that setting the signal code
has failed or that the wiring has been connected incorrectly.
You only need to set up the signal code once. It is not necessary when changing the
batteries of the hand-held transmitter or receiver.
Instructions for use
SETTING THE TIME
• Pres
and
buttons simultaneously.
Day fl ashes.
• Press
or
button to select a number to
correspond with the day of the week (e. g.
1= Monday, 2 = Tuesday, 3 = Wednesday,
4 = Thursday, 5= Friday, 6 = Saturday,
7= Sunday).
• Press
and
Hour fl ashes.
• To select hour press
• Press
and
Minutes fl ash.
• To select minutes press
• To confi rm press
simultaneously or wait.
CHILD PROOF
ON:
• To activate press
simultaneously.
•
displayed and the hand-held transmitter is
rendered inoperable, except for the off function.
OFF:
• To deactivate press
simultaneously.
•
disappears.
button (small fl ame) on the hand-held transmitter,
buttons simultaneously.
or
button.
buttons simultaneously.
and
button.
and
buttons
and
buttons
and
buttons
English
15
Advertisement
