Advertisement
Bellfi res
English
The hand-held transmitter and receiver are powered by batteries.
Hand-held transmitter : 2x 1.5V battery type LR03 or AAA.
Receiver
: 4x 1.5V battery type LR06 or AA.
Option : 6V adapter (230 VAC).
Available from your fi tter.
Note: Hand-held transmitter and receiver are not interchangeable with previous models.
The pilot light is situated in the front of the burner, behind a cowl. Should the pilot light
go out, you must wait fi ve (5) minutes before attempting to re-ignite the fi re.
Important
Once the fi re is lit, it must burn at maximum for approx. 10 minutes to allow the chimney
to come up to temperature!
2.4.2 Hand-held transmitter
The remote control works by radio signal. The hand-held transmitter is confi gured in the
factory with a unique signal code.
Figure 1: Hand-held transmitter
Instructions for use
13
Advertisement
